السيرة الذاتية للأستاذ محمد اسماعيل عليوي السامرائي

الكتب المؤلفة

 

[1] From Fossils to Future Fuels :The Path of Renewable Energy, First Edition,2025 

[2] Introduction to Simulation with ANSYS Mechanical APDL, Second Edition , 2025

 

فصل من كتاب

[1] Solar and Wind Energy Generation Systems with Pumped Hydro Energy Storage: City of Derna (Part of the book series: Environmental Science and Engineering)

 

البحوث المنشورة 

[1] M. A. Eleiwi, J. M. Hassan”Improve Design of Hydraulic Networks by Sparse Matrix Methods”Conference the first country of Mechanical engineering, Minerals and Materials Engineering, Al-Kuffa University/College of Engineering, AM18 ,1-13,2000

[2] M.A. Eleiwi, J.M. Hassan”Transient Flow in a Rectangular Open Channel”, Journal of Engineering N.11 (4), 739-725,2005.

[3] M.A. Eleiwi, A. Theeb”Unsteady 2-Dim.Computational Modeling of Accidental Firing in Tunnels”,Journal of Engineering and Development 10 (3), 87-103,2006.

 

[4] M.A. Eleiwi” Comparison between Oil & Water System due to Power Failure in Pumping Station”,Journal of Engineering and Development 12 (3), 185-207,2006.

[5] M.A. Eleiwi“An Experimental Study on a Vapour Compression Refrigeration Cycle by Adding Internal Heat Exchanger”, Tikrit Journal of Engineering Sciences 15 (4), 63-78,2008.

[6] M.A. Eleiwi” Study of the Resonance in Series Piping Systems with Oscillating Valve”, Tikrit Journal of Engineering Sciences 18 (2), 45-61,2008.

[7] M.A.Eleiwi“Theoretical and Experimental Study of Forced Convection Heat Transfer from a Horizontal Cylinder Embedded in Porous Medium”, Journal of Kirkuk University–Scientific Studies,7 (2), 82-101,2012.

[8] F.L. Rashid, M.A. Eleiwi, H.A. Hoshi” Design Study of Nanofluid Solar Absorption Refrigeration system”, International Journal of Innovative Research in Engineering & Science ISSN 2319-5665,issue 2 volume 6,66-73,2013.

[9] A.Q. Baki, I.K. Fayyadh, A.I. Mahmood, F.L. Rashid, M.A. Eleiwi” Design and Implementation of an Electronic Travel Aid for Environment Discovery Using Infrared Technique”, International Journal of Innovative Research in Engineering & Science, ISSN 2319-5665, issue 2 volume 6,30-35,2013.

[10] I.K. Fayyadh, H. Abd-Al Razak Hassan, M.A. Eleiwi, F.L. Rashid” Determination of the Maxwell-Boltzmann Distribution Probability for Different Gas Mixtures”Engineering and Technology Journal,Vol.32, part A, No.6,2014.

[11] M.A. Eleiwi, A.M. Saleh, A.M. Saleh” Effect of Filling Ratio and Tracking System on Performance of Wickless Heat Pipe Parabolic Trough Solar Collector with Evacuated Glass Tube” Advances in Natural and Applied Sciences, Vol.15 No 9,2015.

[12] M.A. Eleiwi, A.M. Saleh, A.M. Saleh” Effect of Filling Ratio and Tracking System on Performance of Wickless Heat Pipe Parabolic Trough Solar Collector with Evacuated Glass Tube”, Advances in Natural and Applied Sciences, Vol.15 No 9,2015.

[13] T.A. Yassen, N.D. Mokhlif, M.A. Eleiwi” Performance investigation of an integrated solar water heater with corrugated absorber surface for domestic use”, Renewable Energy, Vol.138, Pages 852-860,2019.

[14] F. M. Abed, M. A. Eleiwi, M. Hasanuzzaman, M. M. Islam, and K. I. Mohammed, “Design, development and effects of operational conditions on the performance of concentrated solar collector based desalination system operating in Iraq,” Sustain. Energy Technol. Assessments, vol. 42, 2020.

[15] M. A. Eleiwi, O. A. Zainal, T. A. Tahseen, and A. W. Mustafa, “Effect of front air attack angles on heat transfer coefficient of the cross‐flow of four flat tube,” Heat Transf., no. April, 2020.

[16] M. A. Eleiwi, T. A. Tahseen, and A. F. Hameed, “Numerical study of fluid flow and heat transfer in a backward facing step with three adiabatic circular cylinder,” J. Adv. Res. Fluid Mech. Therm. Sci., vol. 72, no. 1, pp. 80–93, 2020.

[17] M. A. Eleiwi, T. A. Tahseen, and A. H. Ghareeb, “Intelligent control based estimation of heat transfer coefficient from four flat tubes with different attack air angles,” J. Adv. Res. Fluid Mech. Therm. Sci., vol. 72, no. 72, pp. 65–78, 2020.

[18] A. H. Abdulkarim, M. A. Eleiwi, T. A. Tahseen, and E. Canli, “Numerical Forced Convection Heat Transfer of Nanofluids over Back Facing Step and Through Heated Circular Grooves,” Math. Model. Eng. Probl., vol. 8, no. 4, pp. 597–610, 2021.

[19] N. D. Mokhlif, M. A. Eleiwi, and T. A. Yassen, “Experimental investigation of a double glazing integrated solar water heater with corrugated absorber surface,” Mater. Today Proc., vol. 42, pp. 2742–2748, 2021.

[20] M. F. Mohammed, M. A. Eleiwi, and K. T. Kamil, “Experimental Investigation of Thermal Performance of Improvement a Solar Air Heater With Metallic Fiber,” Energy Sources, Part A Recover. Util. Environ. Eff., vol. 43, no. 18, pp. 1–20, 2021.

[21] S. M. Talib, F. L. Rashid, and M. A. Eleiwi, “The effect of air injection in a shell and tube heat exchanger,” J. Mech. Eng. Res. Dev., vol. 44, no. 5, pp. 305–317, 2021.

[22] M. A. Eleiwi ,M. F. Mohammed and K. T. Kamil, “EXPERIMENTAL ANALYSIS OF THERMAL PERFORMANCE OF A SOLAR AIR HEATER WITH A FLAT PLATE AND METALLIC FIBER,” vol. 17, no. 3, pp. 2049–2066, 2022.

[23] M. A. Eleiwi and H. S. Shallal, “Thermal performance of solar air heater integrated with air–water heat exchanger assigned for ambient conditions in Iraq,” Int. J. Ambient Energy, vol. 43, no. 1, pp. 2153–2164, 2022.

[24] M. A. Eleiwi and H. S. Shallal, “Thermal performance of solar air heater integrated with air–water heat exchanger assigned for ambient conditions in Iraq,” Int. J. Ambient Energy, vol. 43, no. 1, pp. 2153–2164, 2022.

[25] M. A. Eleiwi, F. L. Rashid, A. F. Khalaf, and S. A. Tuama, “Numerical Investigation of Conjugate Heat Transfer Between Spherical Solid Body and Fluid,” Math. Model. Eng. Probl., vol. 9, no. 2, pp. 491–497, 2022.

[26] F. L. Rashid ,M. A. Eleiwi et al., “Cfd Simulation in Thermal-Hydraulic Analysis of Airflow on Different Attack Angles of Row Flat Tube,” Front. Heat Mass Transf., vol. 19, pp. 1–8, 2022.

[27] A. E. Khalaf, M. A. Eleiwi, and T. A. Yassen, “Evaluating the tracking effect on the performance of a hybrid photovoltaic system operating in a closed cooling cycle,” Int. J. Mech. Eng., vol. 7, no. 0974–5823, pp. 892–908, 2022.

[28] A. M. Rasheed Al-Gaheeshi, F. L. Rashid, M. A. Eleiwi, and A. Basem, “Thermo-Hydraulic Analysis of Mixed Convection in a Channel-Square Enclosure Assembly with Hemi-Sphere Source at the Bottom,” Int. J. Heat Technol., vol. 41, no. 3, pp. 551–562, 2023.

[29] A. E. Khalaf, M. A. Eleiwi, and T. A. Yassen, “Enhancing the overall performance of the hybrid solar photovoltaic collector by open water cycle jet-cooling,” Renew. Energy, vol. 208, no. July 2022, pp. 492–503, 2023.

[30] N. D. Mokhlif, M. A. Eleiwi, and T. A. Yassen, “Experimental evaluation of a solar water heater integrated with a corrugated absorber plate and insulated flat reflectors,” AIMS Energy, vol. 11, no. 3, pp. 522–539, 2023.

[31] M. A. Eleiwi, N. D. Mokhlif, and H. F. Saleh, “Improving the performance of the thermal energy storage of the solar water heater by using porous medium and phase change material,” Energy Sources, Part A Recover. Util. Environ. Eff., vol. 45, no. 1, pp. 2013–2026, 2023.

[32]F. L. Rashid,M. A. Eleiwi et al., “A Review of Recent Improvements, Developments, Effects, and Challenges on Using Phase-Change Materials in Concrete for Thermal Energy Storage and Release,” J. Compos. Sci., vol. 7, no. 9, 2023.

[33]F. L. Rashid, M. A. Eleiwi, H. I. Mohammed, A. Ameen, and S. Ahmad, “A Review of Using Solar Energy for Cooling Systems: Applications, Challenges, and Effects,” Energies, vol. 16, no. 24, 2023.

[34]T. W. Mohammed, M. N. Mohammed, M. A. Eleiwi, and T. K. Ibrahim, “A Theoretical Study to Incorporate Capillary Tubes Action and Evaporation Process as Green Energy Techniques for Water Lifting,” Tikrit Journal of Engineering Sciences., vol. 30, no. 4, pp. 159–166, 2023.

[35]M. A. Eleiwi, T. A. Yassen, and A. E. Khalaf, “Improving the overall performance of a hybrid photovoltaic system by reflectors and cooling with water jet,” Int. J. Ambient Energy, vol. 45, no. 1, 2024.

[36] Rashid, F. L., Dulaimi, A., Hatem, W. A., Al-obaidi, M. A., Ameen, A., M. A. Eleiwi, Jawad, S. A., & Bernardo, A. “Recent Advances and Developments in Phase Change Materials in High-Temperature Building Envelopes : A Review of Solutions and Challenges, “Buildings, vol.14,no.6, 2024.

[37] I. I. Marhoon, I. A. Atiyah, T. W. Mohammed, and M. A. Eleiwi, “Contribution of Nanoparticles in Elaborating the Thermal Performance of Phase Change Materials : Up-to-date Review Study Introduction ” ,SAMARRA JOURNAL OF ENGINEERING SCIENCE vol. 2, no. 2, pp. 91–107, 2024.

[38] H. F. Saleh , M. A. Eleiwi, and N. D. Mokhlif,  “Improving the Performance of a Home Solar Water Heater System Using Porous Materials and Reflectors,” Tikrit Journal of Engineering Sciences., vol. 31, no. 2, pp. 244-254, 2024.

[39] Hamdey, Mohammed D., Ahmed Hashim Kareem, Bashar Mahmood Ali, Muhammad Asmail Eleiwi, Hasan Shakir Majdi, and Mohammed M. Aldabbagh. “Comparative Analysis of Electrode Performance and Thermal Treatments in SMAW of Dissimilar Metal Joints.” International Journal of Heat and Technology., vol.42, no.6 ,pp.2173–2184,204.

[40] Dhaidan, Nabeel S., Farhan Lafta Rashid, Zainab Abdul Karim Alkhekany, Saif Ali Kadhim, Karrar A. Hammoodi, Mudhar A. Al-Obaidi, Muhammad Asmail Eleiwi, Atef Chibani, and Ephraim Bonah Agyekum. “Review of Solar Pond Performance with PCM and NePCM.” International Communications in Heat and Mass Transfer,vol.166,pp.1-18,2025.

[41] Hassan, Ayad K., Mohammed M. Aldabbagh, Karar Saeed Mohammed, Muhammad Asmail Eleiwi, and Hasan Shakir Majdi. “Effect of Tube Arrangements on Water Heat Transfer in a Rectangular Channel: A Computational Fluid Dynamics Study.” International Journal of Heat and Technology.,vol. 43, no.2,pp. 603-617,2025.

[42] Jawad, Noor H., Rawad Luay Abdul Jabbar, Karar Saeed Mohammed, Muhammad Asmail Eleiwi, and Hasan Shakir Majdi. “Numerical Analysis of Lithium-Ion Electric Vehicle Battery Cooling Efficiency: Evaluating Material Influence on Thermal Performance.” International Journal of Heat and Technology .,vol.43,no.2,pp.391–402,2025.

[43] Muhammad Asmail Eleiwi, and Laith Jaafer Habeeb. 2025. “Strategic Engineering Management for Renewable Energy Projects: Trends, Challenges, and Future Outlook.” Al-Noor Journal of Engineering Management and Computer Science.vol. 1,no.2, pp.1–27,2025.

[44] Rashid, Farhan Lafta, Mudhar A. Al-Obaidi, Haider Nadhom Azziz, Mushtaq K. Abdalrahem, Arman Ameen, Muhammad Asmail Eleiwi, Raad Z. Homod, Saif Ali Kadhim, Ephraim Bonah Agyekum, and Abdallah Bouabidi. “Enhancing Heat Pipe Performance: The Influence of Nanofluids on Thermal Management Technologies – a Comprehensive Review.” International Journal of Thermofluids ., vol.28, pp.1-12,2025.

[45] Rashid, Farhan Lafta, Zainab Abdul Karim Alkhekany, Muhammad Asmail Eleiwi, Abdallah Bouabidi, Shabbir Ahmad, Atef Chibani, Mohamed Kezzar, Saif Ali Kadhim, Ali Habeeb Askar, and Karrar A. Hammoodi. “A Comprehensive Review on Natural Convection in Trapezoidal Cavities with Mono and Hybrid Nanofluids.” International Journal of Thermofluids.,vol.27,pp.1-122,2025.

[46] Rashid, Farhan Lafta, Muhammad Asmail Eleiwi, Tahseen Ahmad Tahseen, Hayder I. Mohammed, Sohaib Abdulrahman Tuama, Arman Ameen, and Ephraim Bonah Agyekum. 2025. “Influence of Adiabatic Semi-Circular Grooved in Backward-Facing Step on Thermal-Hydraulic Characteristics of Nanofluid.” International Journal of Thermofluids.,vol.26,pp.1-11.,2025.

[47] Shijer, Sameera Sadey, Hussein Jassim Akeiber, Muna S. Kassim, Muhammad Asmail Eleiwi, and Hasan Shakir Majdi.“Energy Consumption of Wind Turbines Mounted on Evaporative Condenser for Energy Efficiency Improvement.” Journal Europeen Des Systemes Automatises,vol.58, no.3,pp.467–478,2025.

[48] Al-Nabi Abaas AA, Al-Zuhairy RC, Jassim L, Muhammad Asmail Muhammad Asmail Eleiwi, Majdi HS. “A Design Study on the Use of the Archimedes Windmill for Energy Recovery in Cooling Systems”. Int J Heat Technol. 2025;43(3):1006-1018.

[49] Rashid FL, Al Maimuri NML, Al-Obaidi MA, Muhammad Asmail Eleiwi , Ameen A, Ahmad S, et al. “Enhancing heat transfer across applications with triply periodic minimal surface (TPMS) structures: A comprehensive review”. Chem Eng Process – Process Intensif. 2025;216(June):110460.

[50] Al-Nabi Abaas, Ali Abd, Reyadh Ch Al-Zuhairy, Lina Jassim, Muhammad Asmail Eleiwi, and Hasan Shakir Majdi.”Enhancing Solar Cell Efficiency via Nanotechnology: A CFD-Driven Comparison with Conventional Models”. Math Model Eng Probl. 2025;12(6):2177-2186.

[51] Rashid FL, Muhammad Asmail Eleiwi, Mahdi AJ, Al-Obaidi MA, Alrasheedi N, Ben Hamida MB. “Enhancing the performance of a solar air heater by alphabetic-shaped ribs: a comprehensive review”. J Therm Anal Calorim. 2025;(0123456789).

[52] Amin SA, Marhoon II, Kattab DAAN, Muhammad Asmail Eleiwi, Majdi HS, Habeeb LJ. “Experimental and Numerical Investigating of Heat Input Effects in Gas Metal Arc Welding and Shielded Metal Arc Welding: A Detailed Comparison of Welded Alloy Steel Properties”. Math Model Eng Probl. 2025;12(7):2351-2361.

[53] Rashid, Farhan Lafta, Mudhar A. Al-Obaidi, Najah M. L. Al Maimuri, Mushtaq K. Abdalrahem, Arman Ameen, Osama Abd Al Munaf Ibrahim, Saif Ali Kadhim, Muhammad Asmail Eleiwi, and Ephraim Bonah Agyekum. “Enhancing Efficiency in Double-Pipe Heat Exchangers: A Detailed Review of NanoFluids and Their Impact on Thermal Performance”. Heat Transf. Published online 2025.

[54] Mustafa MAS, Mohammed KS, Abbood HH, Muhammad Asmail Eleiwi, Majdi HS. “Optimization of Different Materials for Drone Blades Using Computational Fluid Dynamics”. Eng Technol Appl Sci Res. 2025;15(4):25836-25843.

[55] Hameed RM, Kareem AH, Marhoon II, Muhammad Asmail Eleiwi, Majdi HS.”Optimizing Magnetorheological and Performance of Vehicles Suspension (MR) Damper, the Role of Ferromagnetic Particle Diameter”. J Eur des Syst Autom. 2025;58(6):1245-1256.

[56] Hassan AK, Mohaisen HS, Mohammed KS, Muhammad Asmail Eleiwi, Majdi HS. “Parametric Study of Heat Transfer in Shell and Tube Heat Exchanger: Cooling of Engine Oil with Water and Ethylene Glycol Mixtures”. Int J Comput Methods Exp Meas. 2025;13(2):405-426.

[58] Rashid, F.L., Al Maimuri, Najah M.L., Hammoodi, K.A., Muhammad Asmail Eleiwi, et al. (2025) “Application of nanofluids for performance improvement of plate heat exchangers: A comprehensive review”, iScience, 28(10):1-25.

[59]  Dhaidan, Nabeel S., Farhan Lafta Rashid, Zainab Abdul Karim Alkhekany, Saif Ali Kadhim, Karrar A. Hammoodi, Mudhar A. Al-Obaidi, Muhammad Asmail Eleiwi,et al. 2025. “Review of Solar Pond Performance with PCM and NePCM.” International Communications in Heat and Mass Transfer 166:109135.

[60] Rashid, Farhan Lafta, Mudhar A. Al-Obaidi, Haider Nadhom Azziz, Mushtaq K. Abdalrahem, Arman Ameen, Muhammad Asmail Eleiwi, et al. 2025. “Enhancing Heat Pipe Performance: The Influence of Nanofluids on Thermal Management Technologies – a Comprehensive Review.” International Journal of Thermofluids 28(June):101311.

[61] Badday, Basma Abdulhadi, Lina Jassim, Muna S. Kassim, Muhammad Asmail Eleiwi, and Hasan Shakir. 2025. “High-Performance Cooling : The Influence of Turbulent Air Inlet Velocity on Triangle Fins for Efficient Heat Transfer.” 43(5):1775–93.

[62] Naji, Ahmed Abdulmohsen, Aseel Kais Rasheed, Ayad K. Hassan, and Muhammad Asmail Eleiwi. 2025. “Mathematical Modelling of Engineering Problems Analysis of Heat Transfer Mechanisms in Multi-Helical Tube and Shell Heat Exchangers Using Computational Fluid Dynamics.” 12(11):3799–3816.